Best ChiTubox Support Settings

If you’ve landed on this page, you must be searching for ways to enhance your 3D printing experience using ChiTubox. Whether you are just starting out or have been using the software for a while, support settings can be tricky to set up correctly. However, getting them right is vital to ensure the best possible results for your 3D prints.

In this article, we take a closer look at the best ChiTubox support settings to help you achieve the perfect prints.

Type of Support Structures

Choosing the right type of support structures can make or break your 3D printing project. ChiTubox offers various support options like Grid, Tree, and Lattice. Grid and Tree structures give good overall support, while Lattice structures are best-suited for more complex objects. The key is to pick the right structure for each type of print. Try experimenting with different structuring to find the best fit.

Support Density

Support density determines the extent of support material used in print. Too little density will result in sagging prints, while too much density can lead to difficult to remove support. To avoid this, go for 15-25% support density in your settings.


The distance between your support structures and your print is critical for achieving the perfect print. If it’s too close, the support will be hard to separate from your print, whereas if it’s too far, there won’t be enough support. For this reason, aim for a 0.3 mm minimum distance.

Overhang Angle

Overhang angle determines the angle at which support structures support your 3D print. Generally, a 45-angle overhang works most of the time. However, if you find your prints failing despite configuring your prints as such, try adjusting it bit by bit until it works.

Experimental Options

Last, but not least, never be afraid to experiment with different support settings to find the perfect configuration for your 3D printing project. The more you tinker with different settings, the closer you will be to finding the ideal balance between your supports and your prints.


3D printing is both an art and science, and the perfect prints require one to pay attention to minute details, including support settings. In ChiTubox, having the best support configuration is key in achieving successful prints. By using the right type, density, distance, and overhang angle, you can ensure that your support structures are tailored to your print’s specifications. Lastly, never hesitate to experiment with different settings, because finding the right set of support configuration is all about trial and error.

We hope that our guide has been helpful in providing insight into the best support settings in ChiTubox, and that your next 3D print is a huge success.

Tyler Woodward

Tyler Woodward

Hi, I'm Tyler! I'm a passionate writer and believer in the potential of 3D printing technology. With my background in engineering and design, I bring an exciting mix of creativity and technical expertise to my writing. In addition, I pride myself on staying up to date with the latest trends in the industry.

We will be happy to hear your thoughts

Leave a reply

3D Printing Fox